The moment I got home from San Francisco I was on the go. I was contacted by a business that wanted to show my work for Woodland's 1st Friday Art Walk. Yeah!! I met with Bonnie from Tech-Knuckle Computer Services, to show her my work and talk details. I left a couple pieces and brought the rest home to get them priced. So being the procrastinator that I am, I had a list of things to do. First on my list was to get some business cards, I was kicking myself for not getting this done sooner. Samantha and I headed off to Office Depot to see about getting some business cards made. My daughter was such a big help in designing my cards. With that tasks done, I went home and locked myself in my room and got the tiny details done.
The show went well, unfortunately the turn out was rather small. The lighting of the Christmas tree was going on at the same time and I think it took a lot of people away from the art walk. I did sell a few pieces. I must say it is a relief to finally get my first show done and over with. Now I know what to expect and will be so much more prepared the next time.
During the lull in the Art Show I talked to Bonnie's husband Brad, about voice recognition software. I told him I have so many hobbies that involve my hands that I really can't multitask too much, I told him I would love to be able to work on my projects and write at the same time. Brad told me I could, my computer was new enough that it came with voice recognition software built in. So he gave me instructions on how to find it and set it up. When I got home I sat down and set everything up for the voice recognition. I did the tutorial and started getting my computer familiar with my voice. I had such grandiose ideas. Let me say, I have been sadly disappointed. When I try and dictate, nothing and I mean nothing is recognised. Not even my string of profanity as I in frustration shut down the program. I have since talked with Brad again and told him of my trouble. He told me it takes time to get the computer to learn your voice, he has suggested that I read a book to my computer, lol, so that is my next little project, when I have time.
With the art show over I could now get back to the creating. I went to do some blacksmithing. My friend John is having knee surgery and with his recovery, he won't be back in the shop for a quite a while. What a bummer for me.
I ran by Harbor Freight before class, I saw a few things in their ad and couldn't pass up a deal on tools, yes I said tools, not shoes. I managed to stick to my mental list and not go overboard. This little extra set of hands, I have a feeling will help me out often. I need to attach it to my work bench. I couldn't pass up an anvil, especially when it $2.57, but it too needs to be installed on the bench. I spent less than $20.00, I got a few pairs of vice grips, but never found the flap disc for my grinder that I orignallly went in there for.
I managed to get lost on my way to class, I hate when streets abruptly stop and then continue a few blocks away. I had to backtrack and arrived late. I had never seen the shop this full before, we had five people, a regular old crowd, kind of dangerous with everyone holding red hot metal. We managed to all stay safe and burn free.
Dave working on making hearts out of old horseshoes.
John dancing with Dali. You can see the blur of the hammer head coming down on the red hot metal.
John sporting the latest in leather aprons, the one shoulder version, so elegant for day time use in the shop.
It was a little crowded around the forge so I worked on my chair for a while. I have had the hardest time designing this chair. All I knew was I wanted it to have three legs and to have a variety of metals.
I've been working on this chair for several months. When I first started, I stood there for the longest time with all my metal, I didn't know where or how to begin. John does not give directions unless you ask and then it's still not a direction, he give you the chance to figure things out on your own. We had a short chat and I decided that I would start with the frame of the seat. I used a piece of chalk and drew out what shape I wanted the legs to have. I bent the back legs which are channel iron to match each other. What a challenge to get the legs on level, I had all sorts of clamps holding everything together, while I welded everything in place. The front leg is a t-bar, recycled from an old garage door.
With the legs on, I used a torch to heat up the round stock so I could wrap it around the legs I wrapped the round stock around each leg moving up higher along the chair legs as I went. The seat frame is welded onto piece of re bar that I wrapped around the back legs. I had wanted to go with a seat like a tractor but I don't have access to an English wheel to get get all the curve done so I will settle for slightly formed seat, so far I've cut out the shape with a plasma cutter and have gotten it all cleaned up and shiny. I still have to clean up some more round stock to add to the legs support and I also need to add a foot rest as well as some arm rests. This chair is really helping me clear out a lot of metal out of my stock pile.
The copper pipe that is sitting on the bench close to the left side of the chair will be going across the chair back, just above the back rest which will be made of that sheet of brass you see between the chair legs. I'm not sure how all that will be constructed, so I walk away. Usually the way it works for me is, when I step back to my chair or my current project I have an idea to move forward.
I managed to make a few more leaves for my pot rack and this steak turner for my Dad. Christmas was just around the corner and I still had a few presents to make. I am not one to help support the commercialism of Christmas and not being religious this is as into Christmas as I get.
I made a few pairs of these earrings out of scrap electrical wire the electricians left, so they cost me a big fat Nada to make.
My first ring, this too was made from recycled electrical wire. One thing is certain, hand modeling is not in my future.
We had a really wet few days so I stayed inside dyeing wool. I started off dyeing in 4 oz. batches and then decided that I wanted to not only spin a solid color, but I wanted to spin multi colored yarn as well so I increased my dye bath to 5 oz of wool. My hands ache so bad from pulling wool apart. When I was little I remember my Grandma holding her hands and saying, "my hands hurt so bad", her fingers were bent and gnarled with the signs of rheumatoid arthritis. Oh, how I miss my grandmother!
All my dyed wool hanging up to dry. Magenta, brilliant yellow, kelly green, blazing orange, Sapphire blue, forest green, plum dandy, fire engine red and alpine blue. The house stinks from vinager that I add to the dye baths.
I have quite a few bobbins of wool spun up I need to put them in hanks and so I can get them washed and ply them.
I wanted to try felting. I did some reading up on the subject and decided to give it a shot. It's not like I don't have any wool to spare.
I laid out my wool in layers, my top layer I got laid out to slightly resemble the night sky. I had the moon in the lower corner and a cloud (a special cloud that a girlfriend and I saw years ago, do you see the angel waving?) The color spots are stars, because stars are never just white, they always seems to be green, or red or blue.
My finished felt looks good but if you ask me doesn't resemble the night sky but reminds me more of a cowhide.
So that about covers my month of December. One other memorable thing happened, I have gotten back in contact with some really important people from my past, people that I thought I would never talk to again, It's been really wonderful to reconnect and I look forward to building on friendships that were started years ago.
Happy New Year!
